In a recent paper, Anthony et al. [Opt. Express 21, 2903 (2013)] demonstrated broadband terahertz pulse propagation through the hollow core fibers with two embedded Indium wires. In another paper by A. Markov et al. [Opt. Express 21, 12728 (2013)], we proposed a plasmonic THz fiber featuring two metallic wires held in place by the porous dielectric cladding functioning as a mechanical support. Although the cross sections of the two waveguides look very similar, we were surprised to find that the guidance mechanisms for these two waveguides are quite different. In fact, waveguide considered by A. Markov et al. was guiding a plasmonic mode, while the waveguide presented by Anthony et al. was guiding a dielectric waveguide-like mode. Finally, we have realized that by reducing the waveguide dimensions by a factor of ~10-20 one can transition from the dielectric waveguide guidance as it is demonstrated by Anthony et al. to plasmonic guidance as reported in A. Markov et al. Therefore, we conclude that both waveguide are essentially identical, while their guidance mechanism changes as a function of the waveguide overall size.

© 2013 Optical Society of America

Full Article  |  PDF Article
OSA Recommended Articles
Hybrid metal wire–dielectric terahertz waveguides: challenges and opportunities [Invited]

Andrey Markov, Hichem Guerboukha, and Maksim Skorobogatiy
J. Opt. Soc. Am. B 31(11) 2587-2600 (2014)

Hybrid hollow core fibers with embedded wires as THz waveguides

Jessienta Anthony, Rainer Leonhardt, and Alexander Argyros
Opt. Express 21(3) 2903-2912 (2013)

Flexible single-mode hollow-core terahertz fiber with metamaterial cladding

Haisu Li, Shaghik Atakaramians, Richard Lwin, Xiaoli Tang, Zhuzheng Yu, Alexander Argyros, and Boris T. Kuhlmey
Optica 3(9) 941-947 (2016)


  • View by:
  • |
  • |
  • |

  1. J. Anthony, R. Leonhardt, and A. Argyros, “Hybrid hollow core fibers with embedded wires as THz waveguides,” Opt. Express 21(3), 2903–2912 (2013).
    [Crossref] [PubMed]
  2. A. Markov and M. Skorobogatiy, “Two-wire terahertz fibers with porous dielectric support,” Opt. Express 21(10), 12728–12743 (2013).
    [Crossref] [PubMed]

2013 (2)

Cited By

OSA participates in Crossref's Cited-By Linking service. Citing articles from OSA journals and other participating publishers are listed here.

Alert me when this article is cited.

Figures (1)

Fig. 1
Fig. 1 a) HE11-like modes described in paper [1] (2.0mm gap is used in [1]). b) Plasmonic-like similar to those described in paper [2]. The number below each pair of modes correspond to the gap between the wires.