T. R. Thomas and B. G. Rose’n, “Surfaces generated by abrasive finishing processes as self-affine fractals,” Int. J. Surf. Sci. Eng. 3(4), 275–285 (2009).

[Crossref]

R. E. Parks, “Specifications: figure and finish are not enough,” Proc. SPIE 7071, 70710B, 70710B-9 (2008).

[Crossref]

A. M. Hvisc and J. H. Burge, “Structure function analysis of mirror fabrication and support errors,” Proc. SPIE 6671, 66710A, 66710A-10 (2007).

[Crossref]

R. N. Youngworth, B. B. Gallagher, and B. L. Stamper, “An overview of power spectral density (PSD) calculations,” Proc. SPIE 5869, 58690U, 58690U-11 (2005).

[Crossref]

D. J. Whitehouse, “Some theoretical aspects of structure functions, fractal parameters and related subjects,” Proc.- Inst. Mech. Eng. 215(2), 207–210 (2001).

[Crossref]

T. R. Thomas and B. G. Rose’n, “Determination of the optimum sampling interval for rough contact mechanics,” Tribol. Int. 33(9), 601–610 (2000).

[Crossref]

T. R. Thomas, B. G. Rose’n, and N. Amini, “Fractal characterisation of the anisotropy of rough surfaces,” Wear 232(1), 41–50 (1999).

[Crossref]

D. M. Aikens, C. R. Wolfe, and J. K. Lawson, “The use of power spectral density (PSD) functions in specifying optics for the national ignition facility,” Proc. SPIE 2576, 281–292 (1995).

[Crossref]

J. K. Lawson, C. R. Wolfe, K. R. Manes, J. B. Trenholme, D. M. Aikens, and R. E. English, “Specification of optical components using the power spectral density function,” Proc. SPIE 2536, 38–50 (1995).

[Crossref]

R. S. Sayles and T. R. Thomas, “The spatial representation of surface roughness by means of the structure function: a practical alternative to correlation,” Wear 42(2), 263–276 (1977).

[Crossref]

J. K. Lawson, C. R. Wolfe, K. R. Manes, J. B. Trenholme, D. M. Aikens, and R. E. English, “Specification of optical components using the power spectral density function,” Proc. SPIE 2536, 38–50 (1995).

[Crossref]

D. M. Aikens, C. R. Wolfe, and J. K. Lawson, “The use of power spectral density (PSD) functions in specifying optics for the national ignition facility,” Proc. SPIE 2576, 281–292 (1995).

[Crossref]

T. R. Thomas, B. G. Rose’n, and N. Amini, “Fractal characterisation of the anisotropy of rough surfaces,” Wear 232(1), 41–50 (1999).

[Crossref]

A. M. Hvisc and J. H. Burge, “Structure function analysis of mirror fabrication and support errors,” Proc. SPIE 6671, 66710A, 66710A-10 (2007).

[Crossref]

J. K. Lawson, C. R. Wolfe, K. R. Manes, J. B. Trenholme, D. M. Aikens, and R. E. English, “Specification of optical components using the power spectral density function,” Proc. SPIE 2536, 38–50 (1995).

[Crossref]

R. N. Youngworth, B. B. Gallagher, and B. L. Stamper, “An overview of power spectral density (PSD) calculations,” Proc. SPIE 5869, 58690U, 58690U-11 (2005).

[Crossref]

A. M. Hvisc and J. H. Burge, “Structure function analysis of mirror fabrication and support errors,” Proc. SPIE 6671, 66710A, 66710A-10 (2007).

[Crossref]

D. M. Aikens, C. R. Wolfe, and J. K. Lawson, “The use of power spectral density (PSD) functions in specifying optics for the national ignition facility,” Proc. SPIE 2576, 281–292 (1995).

[Crossref]

J. K. Lawson, C. R. Wolfe, K. R. Manes, J. B. Trenholme, D. M. Aikens, and R. E. English, “Specification of optical components using the power spectral density function,” Proc. SPIE 2536, 38–50 (1995).

[Crossref]

J. K. Lawson, C. R. Wolfe, K. R. Manes, J. B. Trenholme, D. M. Aikens, and R. E. English, “Specification of optical components using the power spectral density function,” Proc. SPIE 2536, 38–50 (1995).

[Crossref]

R. E. Parks, “Specifications: figure and finish are not enough,” Proc. SPIE 7071, 70710B, 70710B-9 (2008).

[Crossref]

T. R. Thomas and B. G. Rose’n, “Surfaces generated by abrasive finishing processes as self-affine fractals,” Int. J. Surf. Sci. Eng. 3(4), 275–285 (2009).

[Crossref]

T. R. Thomas and B. G. Rose’n, “Determination of the optimum sampling interval for rough contact mechanics,” Tribol. Int. 33(9), 601–610 (2000).

[Crossref]

T. R. Thomas, B. G. Rose’n, and N. Amini, “Fractal characterisation of the anisotropy of rough surfaces,” Wear 232(1), 41–50 (1999).

[Crossref]

R. S. Sayles and T. R. Thomas, “The spatial representation of surface roughness by means of the structure function: a practical alternative to correlation,” Wear 42(2), 263–276 (1977).

[Crossref]

R. N. Youngworth, B. B. Gallagher, and B. L. Stamper, “An overview of power spectral density (PSD) calculations,” Proc. SPIE 5869, 58690U, 58690U-11 (2005).

[Crossref]

T. R. Thomas and B. G. Rose’n, “Surfaces generated by abrasive finishing processes as self-affine fractals,” Int. J. Surf. Sci. Eng. 3(4), 275–285 (2009).

[Crossref]

T. R. Thomas and B. G. Rose’n, “Determination of the optimum sampling interval for rough contact mechanics,” Tribol. Int. 33(9), 601–610 (2000).

[Crossref]

T. R. Thomas, B. G. Rose’n, and N. Amini, “Fractal characterisation of the anisotropy of rough surfaces,” Wear 232(1), 41–50 (1999).

[Crossref]

R. S. Sayles and T. R. Thomas, “The spatial representation of surface roughness by means of the structure function: a practical alternative to correlation,” Wear 42(2), 263–276 (1977).

[Crossref]

J. K. Lawson, C. R. Wolfe, K. R. Manes, J. B. Trenholme, D. M. Aikens, and R. E. English, “Specification of optical components using the power spectral density function,” Proc. SPIE 2536, 38–50 (1995).

[Crossref]

D. J. Whitehouse, “Some theoretical aspects of structure functions, fractal parameters and related subjects,” Proc.- Inst. Mech. Eng. 215(2), 207–210 (2001).

[Crossref]

J. K. Lawson, C. R. Wolfe, K. R. Manes, J. B. Trenholme, D. M. Aikens, and R. E. English, “Specification of optical components using the power spectral density function,” Proc. SPIE 2536, 38–50 (1995).

[Crossref]

D. M. Aikens, C. R. Wolfe, and J. K. Lawson, “The use of power spectral density (PSD) functions in specifying optics for the national ignition facility,” Proc. SPIE 2576, 281–292 (1995).

[Crossref]

R. N. Youngworth, B. B. Gallagher, and B. L. Stamper, “An overview of power spectral density (PSD) calculations,” Proc. SPIE 5869, 58690U, 58690U-11 (2005).

[Crossref]

T. R. Thomas and B. G. Rose’n, “Surfaces generated by abrasive finishing processes as self-affine fractals,” Int. J. Surf. Sci. Eng. 3(4), 275–285 (2009).

[Crossref]

R. E. Parks, “Specifications: figure and finish are not enough,” Proc. SPIE 7071, 70710B, 70710B-9 (2008).

[Crossref]

A. M. Hvisc and J. H. Burge, “Structure function analysis of mirror fabrication and support errors,” Proc. SPIE 6671, 66710A, 66710A-10 (2007).

[Crossref]

D. M. Aikens, C. R. Wolfe, and J. K. Lawson, “The use of power spectral density (PSD) functions in specifying optics for the national ignition facility,” Proc. SPIE 2576, 281–292 (1995).

[Crossref]

J. K. Lawson, C. R. Wolfe, K. R. Manes, J. B. Trenholme, D. M. Aikens, and R. E. English, “Specification of optical components using the power spectral density function,” Proc. SPIE 2536, 38–50 (1995).

[Crossref]

R. N. Youngworth, B. B. Gallagher, and B. L. Stamper, “An overview of power spectral density (PSD) calculations,” Proc. SPIE 5869, 58690U, 58690U-11 (2005).

[Crossref]

D. J. Whitehouse, “Some theoretical aspects of structure functions, fractal parameters and related subjects,” Proc.- Inst. Mech. Eng. 215(2), 207–210 (2001).

[Crossref]

T. R. Thomas and B. G. Rose’n, “Determination of the optimum sampling interval for rough contact mechanics,” Tribol. Int. 33(9), 601–610 (2000).

[Crossref]

T. R. Thomas, B. G. Rose’n, and N. Amini, “Fractal characterisation of the anisotropy of rough surfaces,” Wear 232(1), 41–50 (1999).

[Crossref]

R. S. Sayles and T. R. Thomas, “The spatial representation of surface roughness by means of the structure function: a practical alternative to correlation,” Wear 42(2), 263–276 (1977).

[Crossref]

E. L. Church and P. Z. Takacs, “Surface scattering,” in Handbook of Optics. vol. I, M. Bass, ed. (McGraw-Hill, New York, 2009).

D. J. Whitehouse, The Properties of Random Surfaces of Significance in their Contact (University of Leicester, 1971).

V. I. Tatarski, Wave Propagation in a Turbulent Medium (McGraw-Hill, 1961).