Abstract

Two ultra-compact designs of wideband photonic to metal-dielectric-metal (MDM) couplers are introduced. The two proposed couplers show a high efficiency of 92% and 94% at unexpected very small coupling lengths, using MDM as a coupling waveguide. Emerging from the half-wavelength transformer concept, when the characteristic impedances of the coupled waveguides are equal in magnitude but have a phase difference, we report a slight shift in the coupler length of the first maximum. Relying on this concept, the lengths of the proposed couplers are 10 nm and 15 nm, respectively, to match the phase shift. The proposed couplers also enjoy a very wide bandwidth of 1785 nm for the 10 nm design and 1865 nm for the 15 nm design because of the short coupling length. Also, we introduce a 3D design for the coupler based on a quasi-MDM waveguide of a 20 nm silver layer to facilitate the fabrication process. The simulation results are produced by 2D finite element methods and verified by 3D finite difference time domain, but with incomparable computational cost.

© 2019 Optical Society of America

Guidelines for designing 2D and 3D plasmonic stub resonators

Solmaz Naghizadeh and Şükrü Ekin Kocabaş
J. Opt. Soc. Am. B 34(1) 207-217 (2017)

Theoretical investigation of compact couplers between dielectric slab waveguides and two-dimensional metal-dielectric-metal plasmonic waveguides

Georgios Veronis and Shanhui Fan
Opt. Express 15(3) 1211-1221 (2007)

Compact and wideband multiport plasmonic coupler–splitter based on coding metamaterials

Shuai Yu, Zunwei Liu, Jian Dai, Tian Zhang, and Kun Xu
J. Opt. Soc. Am. B 40(9) 2399-2406 (2023)

Nanoplasmonic couplers and splitters

Rami A. Wahsheh, Zhaolin Lu, and Mustafa A. G. Abushagur
Opt. Express 17(21) 19033-19040 (2009)

Efficient low dispersion compact plasmonic-photonic coupler

T. P. H. Sidiropoulos, S. A. Maier, and R. F. Oulton
Opt. Express 20(11) 12359-12365 (2012)