Abstract

We investigate the dynamical behavior of optical Fabry–Perot resonators consisting of ${\mathrm{LiNbO}}_3$ slabs (x and c cut) that are coated with different (absorbing or lossless) dielectric multilayers deposited on both sides of the slabs. Bistable switching is observed experimentally. The buildup of beam fanning with time leads to destructive interference for a portion of the incident beam, inducing a change in absorption and heating, hence to switching off. As a result, self-pulsations appear whose frequency depends strongly on the input light intensity, the spot size, and the focusing. Switching and self-pulsations are not observed in the case of lossless coatings or for bare ${\mathrm{LiNbO}}_3$ slabs, although strong photorefractive beam fanning is still present. We also study the influence of the incident-beam characteristics (width and focusing) on the beam-fanning process and the pulsating behavior.

© 2001 Optical Society of America

Temporal evolution of beam fanning in LiNbO₃:Fe,In crystals

Xinzheng Zhang, Jingjun Xu, Simin Liu, Hui Huang, Johann Wolfsberger, Xiaohu Chen, and Guangyin Zhang
Appl. Opt. 40(5) 683-686 (2001)

Role of diffusive, photovoltaic, and thermal effects in beam fanning in LiNbO₃

Jaw-Jueh Liu, Partha P. Banerjee, and Q. Wang Song
J. Opt. Soc. Am. B 11(9) 1688-1693 (1994)

Incoherent-to-coherent conversion by use of the photorefractive beam-fanning effect and amplification by two-wave coupling in a photorefractive Ba_1-xSr_xTiO₃ crystal

Yishen Qiu, Zhiqiang Zheng, Tuansun Lu, Wenchai Huang, J. Zhuang, and D. Y. Tang
Appl. Opt. 40(5) 687-690 (2001)

Insight into a new geometrical approach to beam fanning in BaTiO₃

C. Mailhan, M. Goetz, N. Fressengeas, and G. Kugel
J. Opt. Soc. Am. B 18(1) 64-74 (2001)

Transient dark photovoltaic spatial solitons and induced guiding in slab LiNbO₃ waveguides

M. Chauvet, S. Chauvin, and H. Maillotte
Opt. Lett. 26(17) 1344-1346 (2001)