Abstract
We experimentally obtain a lower frequency shift based on mode conversion by using a mode-selective coupler (MSC) and an acoustically induced fiber grating (AIFG) for optical heterodyne micro-vibration measurement. Through efficient conversion between LP11 and LP01 core modes in a few-mode fiber, a mode conversion frequency shifter (MCFS) can be achieved and the magnitude of frequency shift is several hundred kHz, which is generally challenging for traditional bulk acousto-optic frequency shifter. Moreover, the signal-to-signal beating interference (SSBI) can be eliminated by using the MCFS without requirement of guard band. The scheme of optical heterodyne micro-vibration measurement based on the MCFS has a high-quality signal-to-noise ratio (SNR) over 85 dB. An all-fiber Bragg grating (FBG) scheme is also designed to improve the measurement sensitivity of heterodyne detection, which has a measurable vibration frequency range of 1 Hz to 300 kHz and minimal detectable amplitude of 0.019 nm. The all-fiber MCFS has the advantages of compactness, easy integration and can be applied directly to satellite ground station and laser feedback tomography.
PDF Article
More Like This
Cited By
You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Login to access Optica Member Subscription