Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group
  • Journal of Lightwave Technology
  • Vol. 36,
  • Issue 4,
  • pp. 1018-1025
  • (2018)

Laser Cladding-Based Metallic Embedding Technique for Fiber Optic Sensors

Not Accessible

Your library or personal account may give you access

Abstract

In many applications in the industry, securely attaching fiber optic sensors to metallic structures is important for optimum monitoring, overcoming the limitations of glues and adhesives which are known to degrade under certain circumstances. To avoid that problem, creating a metallic bond to attach the sensors securely to the metal surface is important. Commercial fiber optics with metal coatings can be used but it is important not to damage the sensor itself which is written in the thin optical fiber. In this work, an alternative laser cladding technology has been studied for embedding metal-coated fiber optics into which fiber Bragg grating (FBG) sensors have been written. A three-step strategy was selected for embedding the metal coating fibers to create the best conditions to allow high-quality measurements. This has been seen to allow good control of the embedding process to be achieved and to minimize the thermal and mechanical stress generated. The research undetaken has shown that it is possible to embed Cu- and Ni-coated fiber optics containing sensors to over 300 μm with low losses, of between 0–1.5 dB (or 0–30%) and yet still enable satisfactory strain and temperature measurement results to be obtained. The research has shown that both Ni- and Cu-coated FBG-based fiber optic sensors could be embedded successfully and shown to give good mechanical and thermal response to similar nonembedded sensors and excellent cross-comparison with the conventional gauge used for calibration. The results are, therefore, particularly encouraging for the use of sensors of this type when incorporated to create metallic “smart structures” achieving durability of the sensors through the use of this innovative technique.

© 2017 IEEE

PDF Article
More Like This
Temperature and external strain sensing with metal-embedded optical fiber sensors for structural health monitoring

Qiang Bian, Alexander Podhrazsky, Constantin Bauer, Andrea Stadler, Fabian Buchfellner, Rolf Kuttler, Martin Jakobi, Wolfram Volk, Alexander W. Koch, and Johannes Roths
Opt. Express 30(19) 33449-33464 (2022)

Metallic structure functional sensor based on embedded PANDA fiber by ultrasonic additive manufacturing

Xuelan He, Chao Ma, Xianbin Wang, Zhenqiang Wang, Fengchun Jiang, and Libo Yuan
Appl. Opt. 59(16) 4880-4887 (2020)

Metal-coated high-temperature strain optical fiber sensor based on cascaded air-bubble FPI-FBG structure

Jianqiao Liang, Yang Yu, Qiang Bian, Wenjie Xu, Zhencheng Wang, Shumao Zhang, Junjie Weng, Jiajian Zhu, Yong Chen, Xiaoyang Hu, Junbo Yang, and Zhenrong Zhang
Opt. Express 31(10) 16795-16811 (2023)

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved