Abstract

Phase errors caused by fabrication variations in silicon photonic integrated circuits are an important problem, which negatively impacts device yield and performance. This paper reports our recent progress in the development of a method for permanent, postfabrication phase error correction of silicon photonic circuits based on femtosecond laser irradiation. Using beam shaping technique, we achieve a 14-fold enhancement in the phase tuning resolution of the method with a Gaussian-shaped beam compared to a top-hat beam. The large improvement in the tuning resolution makes the femtosecond laser method potentially useful for very fine phase trimming of silicon photonic circuits. We also show that femtosecond laser pulses can directly modify silicon photonic devices through a SiO₂ cladding layer, making it the only permanent post-fabrication method that can tune silicon photonic circuits protected by an oxide cladding.

© 2016 IEEE

Permanent fine tuning of silicon microring devices by femtosecond laser surface amorphization and ablation

Daniel Bachman, Zhijiang Chen, Robert Fedosejevs, Ying Y. Tsui, and Vien Van
Opt. Express 21(9) 11048-11056 (2013)

Femtosecond laser tuning of silicon microring resonators

Daniel Bachman, Zhijiang Chen, Ashok M. Prabhu, Robert Fedosejevs, Ying Y. Tsui, and Vien Van
Opt. Lett. 36(23) 4695-4697 (2011)

Hydrogenated amorphous silicon photonic device trimming by UV-irradiation

Timo Lipka, Melanie Kiepsch, Hoc Khiem Trieu, and Jörg Müller
Opt. Express 22(10) 12122-12132 (2014)

Photonic integrated circuit components based on amorphous silicon-on-insulator technology

Timo Lipka, Lennart Moldenhauer, Jörg Müller, and Hoc Khiem Trieu
Photon. Res. 4(3) 126-134 (2016)

Real-time monitoring and gradient feedback enable accurate trimming of ion-implanted silicon photonic devices

Bigeng Chen, Xingshi Yu, Xia Chen, Milan M. Milosevic, David J. Thomson, Ali Z. Khokhar, Shinichi Saito, Otto L. Muskens, and Graham T. Reed
Opt. Express 26(19) 24953-24963 (2018)