Abstract

We demonstrate an optical fiber fault location method based on the frequency response of the modulated fiber optical backscattered signal in a steady-state low-frequency step regime. Careful calibration and measurement allows for the reconstruction of the fiber transfer function, which, associated to its mathematical model, is capable of extracting the fiber characteristics. The technique is capable of identifying nonreflective fault events in an optical fiber link and is perfectly compatible with previous methods that focus on the reflective events. The fact that the recuperation of the complex signal is performed in the frequency domain and not via a Fourier transform enables the measurements to overcome the spatial resolution limitation of Fourier transform incoherent-OFDR measurements even with frequency sweep ranges down to 100–100 000 Hz. This result is backed up by a less than 10 meters difference in fault location when compared to standard optical time domain reflectometry measurements.

© 2017 IEEE

Optical fiber fault locator by the step frequency method

Junichi Nakayama, Keigo Iizuka, and John Nielsen
Appl. Opt. 26(3) 440-443 (1987)

Optical fiber fault location method

Yoshito Ueno and Motoh Shimizu
Appl. Opt. 15(6) 1385-1388 (1976)

Fiber fault location utilizing traffic signal in optical network

Tong Zhao, Anbang Wang, Yuncai Wang, Mingjiang Zhang, Xiaoming Chang, Lijuan Xiong, and Yi Hao
Opt. Express 21(20) 23978-23984 (2013)

Detection of Fiber Faults in Passive Optical Networks

P. J. Urban, A. Getaneh, J. P. von der Weid, G. P. Temporão, G. Vall-llosera, and J. Chen
J. Opt. Commun. Netw. 5(11) 1111-1121 (2013)

Identification method of non-reflective faults based on index distribution of optical fibers

Wonkyoung Lee, Seung Il Myong, Jyung Chan Lee, and Sangsoo Lee
Opt. Express 22(1) 325-337 (2014)