Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group
  • Journal of Lightwave Technology
  • Vol. 29,
  • Issue 23,
  • pp. 3566-3576
  • (2011)

Fabrication of Polymer Waveguides by Laser Ablation Using a 355 nm Wavelength Nd:YAG Laser

Not Accessible

Your library or personal account may give you access

Abstract

The demand for optical waveguides integrated into Printed Circuit Boards (PCBs) is increasing as the limitations of copper interconnects for greater than 10 Gb/s data rates are being reached. Optical polymer materials offer a good solution due to their relatively low cost and compatibility with traditional PCB manufacturing processes. Laser ablation is one method of manufacture, for which excimer lasers have been used, but UV Nd:YAG (Neodymium-doped Yttrium Aluminium Garnet) lasers are an attractive alternative due to their widespread use within the PCB industry for drilling vias. In this paper, 355 nm, 60 ns pulse length UV Nd:YAG laser ablation of Truemode™ acrylate-based optical polymer was investigated. The UV Nd:YAG laser was found to be able to ablate the polymer efficiently and the effects of laser ablation power and pulse repetition frequency (PRF) on depth of ablation were studied and used to determine preferred settings. 45 × 45 μm multimode optical waveguides were fabricated to demonstrate the process and optical loss measurements were carried out. These measurements demonstrated that the structures were able to transmit light at the data communications wavelength of 850 nm (NIR), but further work is required to reduce the level of loss. The use of UV Nd:YAG as a possible alternative to excimer for laser micromachining would facilitate the rapid deployment of the optical technology within the PCB industry.

© 2011 IEEE

PDF Article
More Like This
Gratings fabrication in benzildimethylketal doped photosensitive polymer optical fibers using 355 nm nanosecond pulsed laser

Yanhua Luo, Qijin Zhang, Huiyong Liu, and Gang-Ding Peng
Opt. Lett. 35(5) 751-753 (2010)

Dispensed polymer waveguides and laser-fabricated couplers for optical interconnects on printed circuit boards

Yongzhang Leng, Victor Yun, Lisa Lucas, Warren N. Herman, and Julius Goldhar
Appl. Opt. 46(4) 602-610 (2007)

Femtosecond laser written surface waveguides fabricated in Nd:YAG ceramics

Gustavo A. Torchia, Pablo F. Meilán, Airan Rodenas, Daniel Jaque, Cruz Mendez, and Luis Roso
Opt. Express 15(20) 13266-13271 (2007)

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved