Abstract

This paper theoretically describes effective suppression of higher order modes (HOMs) in realistic large-hollow-core photonic band-gap fibers (PBGFs) and utilizes the use of this class of waveguides for low-loss data-transmission applications and high-power beam delivery systems. The proposed design strategy is based on the resonant-coupling mechanism of central air-core modes with defected outer core modes. By incorporating six 7-unit-cell air cores in the cladding of the PBGF with sixfold symmetry, it is possible by resonantly coupling the light corresponding to the HOMs in a central 19-unit-cell core into the outer 7-unit-cell core, thus significantly increasing the leakage losses of the HOMs in comparison to those of fundamental mode. We consider a realistic PBGF structure with hexagonal airholes having rounded corners and derive a surface-mode-free condition of a silica-ring thickness surrounding the hollow core for both 7-unit-cell and 19-unit-cell cores. Verification regarding the propagation properties of the proposed design is ensured with a PBGF analysis based on a finite element modal solver. Numerical results show that the leakage losses of the HOMs can be enhanced in a level of at least three orders of magnitude over 200-nm wavelength range in comparison to those of the fundamental mode, while in addition, we show that the incorporation of a realistic air core with optimized silica-ring thickness can eliminate surface modes and achieve strong confinement into the central core and very low <i>η</i> -factor for the fundamental mode.

© 2007 IEEE

Design of photonic band gap fibers with suppressed higher-order modes: Towards the development of effectively single mode large hollow-core fiber platforms

Kunimasa Saitoh, Nikolaos John Florous, Tadashi Murao, and Masanori Koshiba
Opt. Express 14(16) 7342-7352 (2006)

Optimizing the usable bandwidth and loss through core design in realistic hollow-core photonic bandgap fibers

R. Amezcua-Correa, N. G. R. Broderick, M. N. Petrovich, F. Poletti, and D. J. Richardson
Opt. Express 14(17) 7974-7985 (2006)

Design of effectively single-mode air-core photonic bandgap fiber with improved transmission characteristics for the realization of ultimate low loss waveguide

Tadashi Murao, Kunimasa Saitoh, Nikolaos J. Florous, and Masanori Koshiba
Opt. Express 15(7) 4268-4280 (2007)

Higher-order mode suppression in twisted single-ring hollow-core photonic crystal fibers

N. N. Edavalath, M. C. Günendi, R. Beravat, G. K. L. Wong, M. H. Frosz, J.-M. Ménard, and P. St.J. Russell
Opt. Lett. 42(11) 2074-2077 (2017)

Air-core photonic band-gap fibers: the impact of surface modes

K. Saitoh, N. A. Mortensen, and M. Koshiba
Opt. Express 12(3) 394-400 (2004)