Abstract
We propose and demonstrate two novel techniques for 10 Gb/s polarization-mode-dispersion (PMD) monitoring for NRZ signals that use a regenerated RF clock tone as a monitoring signal. Our techniques regenerate the RF clock tone that is usually absent after square-law detection in the electrical NRZ data spectrum (in the absence of dispersion). Our first technique uses a dispersive element in the monitoring tap-line to put the beat terms between the optical clock sidebands and the carrier in phase and thus regenerates the RF clock tone after detection. Our second technique involves the use of an optical filter that is centered at the bit rate frequency on either the upper or lower sideband of the optical spectrum, removing one of the sidebands and thus preventing the beating that normally cancels the RF clock tone. We show (theoretically,via simulation, and experimentally) the effect that PMD has on these regenerated RF clock tones. We also demonstrate PMD compensation at 10 Gb/s using these techniques for monitoring and show a 6-dB improvement in the 1% power penalty tail. Our techniques are simple, do not require modification at the transmitter,and can be applied to WDM systems via the use of a multichannel dispersive element or a tunable filter swept across all channels.
© 2004 IEEE
PDF Article
More Like This
Cited By
You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Login to access Optica Member Subscription