Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group
  • Journal of Lightwave Technology
  • Vol. 21,
  • Issue 10,
  • pp. 2305-
  • (2003)

Optimizing Imbalance and Loss in 2 × 2 3-dB Multimode Interference Couplers via Access Waveguide Width

Not Accessible

Your library or personal account may give you access

Abstract

The imbalance and excess loss in multimode interference couplers with fabrication errors are examined. Remarkably, there exists a number of optimum access waveguide widths which give a minimum imbalance. Furthermore,quite low excess loss can be simultaneously achieved by choosing one particular optimum width. It is also shown that paired interference couplers have better imbalance performance than general interference couplers, given the same fabrication tolerances and length constraint for both coupler types. In particular, a paired interference coupler with an access waveguide width approximately 0.3 times the coupler width has the best imbalance performance. These results are obtained using a simple model and are supported by more sophisticated numerical models and experimental data from couplers fabricated in InP/InGaAsP.

© 2003 IEEE

PDF Article
More Like This
Optimum access waveguide width for 1×N multimode interference couplers on silicon nanomembrane

Amir Hosseini, Harish Subbaraman, David Kwong, Yang Zhang, and Ray T. Chen
Opt. Lett. 35(17) 2864-2866 (2010)

Accurate numerical analysis of multimode-interference-based 3-dB couplers

Muttukrishnan Rajarajan, B. M. Azizur Rahman, and Kenneth T. V. Grattan
Appl. Opt. 37(24) 5672-5678 (1998)

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved