Abstract

A novel principle of light transmission through very small radius bend in optical fibers is presented. The potential applications of the proposed structure are fiber optic sensors and other fiber optic systems. The design makes use of graded index multimode fiber as transmission medium. However,the feed to the multimode fiber is through a single mode fiber to ensure that only the lowest order spatial mode is launched. Similarly the receiver is also coupled to the sensing element through a single mode fiber. The fundamental mode within graded index multimode fiber proves to be very insensitive to macrobends if bend radius is larger than certain critical value. If bend radius is reduced below critical value the loss increases very rapidly and this allows for construction of relatively sensitive macrobend fiber optic sensor. This work presents a quantitative theoretical model of the proposed structure and a detailed experimental investigation of structure with possibilities for its practical applications.

[IEEE ]

Propagation of light trapped within a set of lowest-order modes of graded-index multimode fiber undergoing bending

Charles K. Asawa and Henry F. Taylor
Appl. Opt. 39(13) 2029-2037 (2000)

Gaussian approximation of the fundamental modes of graded-index fibers

D. Marcuse
J. Opt. Soc. Am. 68(1) 103-109 (1978)

Multimode and single-mode fiber compatible graded-index multicore fiber for high density optical interconnect application

Yinping Liu, Lin Ma, Chen Yang, Weijun Tong, and Zuyuan He
Opt. Express 26(9) 11639-11648 (2018)

Application of the coupled-mode theory to a specialized graded-index optical fiber coupler

Walter K. Kahn and Salama A. Saleh
Appl. Opt. 31(15) 2780-2790 (1992)

A low bending loss multimode fiber transmission system

Denis Donlagic
Opt. Express 17(24) 22081-22095 (2009)