Abstract

A newly developed linear electrostatic microactuator mechanism employing a vibrating motion is described. In order to achieve a miniature charge coupled device (CCD) camera with autofocusing and zoom functions, we developed an electrostatic linear microactuator with a large movement range. In miniature CCD cameras, extremely thin electrostatic actuators are needed because the space available for the focusing mechanism is reduced. The moving part (Slider) of this actuator is sandwiched between fixed electrodes (Stator), is alternately attached and detached to these fixed electrodes, and actuates linearly on a macroscopic level. The fundamental feasibility of this vibrating motion mechanism was first confirmed in experiments. This actuator was then applied to the focusing mechanism of a miniature CCD camera. A microlens was fitted inside the slider and it was possible to adjust the focus by moving the slider (with microlens). The size of the prototype for the focusing mechanism is 3.6 {{\times}} 4.6 {{\times}} 8.0 mm, and a 2-mm movement range is achieved. The minimum driving voltage is 60 V and the maximum velocity is 1.0 mm/s.

[IEEE ]

Design of ultrafast laser-driven microactuator based on photoacoustic mechanism

F.H. Li, C.X. Pei, B. Shi, L.B. Sun, H.J. Zhang, J.Z. Jiang, and D.X. Zhang
Opt. Express 23(16) 20563-20568 (2015)

A miniaturized low-power VCM actuator for auto-focusing applications

Chien-Sheng Liu and Psang Dain Lin
Opt. Express 16(4) 2533-2540 (2008)

Theoretical and experimental study of optothermal expansion and optothermal microactuator

Dongxian Zhang, Haijun Zhang, Chao Liu, and Jianzhong Jiang
Opt. Express 16(17) 13476-13485 (2008)

Microelectromechanically-driven miniature adaptive Alvarez lens

Guangya Zhou, Hongbin Yu, and Fook Siong Chau
Opt. Express 21(1) 1226-1233 (2013)

Detecting organic materials with a CCD camera

G. McGunnigle and M. Kraft
Appl. Opt. 53(35) 8326-8334 (2014)