Abstract

Based on the theory of quasi-three-level rate equations modified by amplified spontaneous emission, the stored energy density and the small signal gain of the cryogenic Yb:YAG regenerative amplifier for a given geometry for pulsed pumping in three dimensions are theoretically studied using the Monte Carlo simulation. The present model provides a straightforward procedure to design the Yb:YAG parameters and the optical coupling system for optimization when running at cryogenic temperature. A fiber-coupled laser diode end-pumped cryogenic Yb:YAG regenerative amplifier running at 1 030 nm is demonstrated with a maximum output energy 10.2 mJ at a repetition rate of 10 Hz. A very good agreement between the experiments and the theoretical model is achieved.

© 2011 Chinese Optics Letters

Modeling of amplified spontaneous emission, heat deposition, and energy extraction in cryogenically cooled multislab Yb³⁺:YAG laser amplifier for the HiLASE Project

Magdalena Sawicka, Martin Divoky, Jakub Novak, Antonio Lucianetti, Bedrich Rus, and Tomas Mocek
J. Opt. Soc. Am. B 29(6) 1270-1276 (2012)

Multi-millijoule, diode-pumped, cryogenically-cooled Yb:KY(WO₄)₂ chirped-pulse regenerative amplifier

K. Ogawa, Y. Akahane, M. Aoyama, K. Tsuji, S. Tokita, J. Kawanaka, H. Nishioka, and K. Yamakawa
Opt. Express 15(14) 8598-8602 (2007)

Highly efficient room-temperature Yb:YAG ceramic laser and regenerative amplifier

A. V. Okishev
Opt. Lett. 37(7) 1199-1201 (2012)

Power and energy scaling of rod-type cryogenic Yb:YLF regenerative amplifiers

Umit Demirbas, Huseyin Cankaya, Mikhail Pergament, and Franz X. Kärtner
J. Opt. Soc. Am. B 37(6) 1865-1877 (2020)

23.7-W picosecond cryogenic-Yb:YAG multipass amplifier

Shigeki Tokita, Junji Kawanaka, Yasukazu Izawa, Masayuki Fujita, and Toshiyuki Kawashima
Opt. Express 15(7) 3955-3961 (2007)