Abstract
A vapor cell provides a well-controlled and stable inner atmosphere for atomic sensors, such as atomic gyroscopes, atomic magnetometers, and atomic clocks, and its hermeticity affects the stability and aging of atomic sensors. We present the micro-fabrication of a micro-electromechanical system wafer-level hermit vapor cell based on deep reactive ion etching and vacuum anodic-bonding technology. The anodic-bonding process with the voltage increasing in steps of 200 V had a critical influence on vapor cell hermeticity. Further, the silicon–glass bonding surface was experimentally investigated by a scanning electron microscope, which illustrated that there were no visual cracks and defects in the bonding surface. The leak rate was measured using a helium leak detector. The result shows that the vapor cells with different optical cavity lengths comply with the MIL-STD-883E standard (5 × 10−8 mbar·L/s). Moreover, D2 absorption spectroscopy was characterized via optical absorption. The bonding strength was determined to be 13 MPa, which further verified the quality of the vapor cells.
© 2019 Chinese Laser Press
PDF Article
More Like This
Cited By
You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Login to access Optica Member Subscription