Abstract

In this paper, we propose a theoretical study dedicated to the assessment of plasma current measurement in magnetic confinement fusion reactors using a polarization optical time-domain reflectometer (POTDR) setup with a low-birefringence fiber used as the sensing fiber. We consider the general case of a non-uniform magnetic-field distribution along the sensing fiber. The numerical simulations, based on Jones formalism taking into account the OTDR noise, provide the measurement error as a function of the plasma current. The measurement performance is evaluated for an ITER-relevant sensor configuration. We demonstrate that a signal-to-noise ratio of 6 dB, achievable in modern POTDRs, allows us to comply with the ITER requirements for plasma currents from 0 to 1 MA, while for the 1 to 20 MA range, the level is relaxed to 4 dB.

© 2019 Optical Society of America

Plasma current measurement in ITER with a polarization-OTDR: impact of fiber bending and twisting on the measurement accuracy

Prasad Dandu, Andrei Gusarov, Philippe Moreau, Willem Leysen, SungMoon Kim, Patrice Mégret, and Marc Wuilpart
Appl. Opt. 61(9) 2406-2416 (2022)

Influence of the optical fiber type on the performances of fiber-optics current sensor dedicated to plasma current measurement in ITER

Matthieu Aerssens, Frédéric Descamps, Andrei Gusarov, Patrice Mégret, Philippe Moreau, and Marc Wuilpart
Appl. Opt. 54(19) 5983-5991 (2015)

Simulation of vibration-induced effect on plasma current measurement using a fiber optic current sensor

Frédéric Descamps, Matthieu Aerssens, Andrei Gusarov, Patrice Mégret, Vincent Massaut, and Marc Wuilpart
Opt. Express 22(12) 14666-14680 (2014)

Proposed Method of Measuring the Current Distribution in a Tokamak Plasma

Norton Bretz
Appl. Opt. 13(5) 1134-1140 (1974)

Plasma current measurements by Faraday rotation in a single-mode fiber

H. S. Lassing, W. J. Mastop, A. F. G. van der Meer, and A. A. M. Oomens
Appl. Opt. 26(12) 2456-2460 (1987)