Abstract
A closed-loop resonant fiber optic gyroscope (RFOG) configuration with three resonance frequency servo loops is proposed. By using one laser-servo loop and two symmetrical phase modulator (PM) servo loops, the effect of the reset due to the limited tracking range of the laser-servo loop is solved. Further long-term stability for 48 h and thermal stability at moderate rate measurements show that the output of the triple closed-loop RFOG is insensitive to environmental temperature variations. When the temperature increased from 17.5°C to 40.7°C in 1800 s and the maximum temperature rate was about 0.025°C/s during heating, the laser-servo loop was reset a total of 413 times. However, the output of the triple closed-loop RFOG is not affected by those frequent resets in the laser-servo loop because the two PM-servo loops are free of glitch pulses under this new scheme. Compared to the traditional double closed-loop RFOG, the thermal bias stability of the triple closed-loop RFOG is improved by a factor of 15 times from 29.8°/h to 1.88°/h.
© 2020 Optical Society of America
Full Article | PDF ArticleMore Like This
Ming Lei, Huaiyong Yu, Yuan Fang, Zhe Feng, Yanji Wu, and Lizhe Zhang
Appl. Opt. 59(4) 923-928 (2020)
Hanzhao Li, Yi Lin, Lu Liu, Huilian Ma, and ZHonghe Jin
Opt. Express 28(12) 18103-18111 (2020)
Shuang Liu, Lu Liu, Junyi Hu, Hanzhao Li, Qingwen Liu, Huilian Ma, and Zuyuan He
Appl. Opt. 61(16) 4971-4979 (2022)