Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

Ultrashort inverted tapered silicon ridge-to-slot waveguide coupler at 1.55 µm and 3.392 µm wavelength

Not Accessible

Your library or personal account may give you access

Abstract

Herein, a compact and efficient inverted tapered ridge-to-slot waveguide coupler design based on the silicon-on-insulator platform is presented. The proposed device consists of three segments such as ridge waveguide, inverted taper segment, and slot waveguide. The coupling segment resembles a V shape, which provides good mode-matching between the ridge and slot waveguide. Two significant aspects of the proposed coupler design are discussed. In the first part of the paper, the coupler design optimized at 1.55 µm is suggested for optical interconnect. The propagation loss and coupling efficiency of 1.69 dB/µm and 91% are obtained for the 100 nm long tapered segment introduced between the ridge waveguide and slot waveguide, respectively. This propagation loss of the device includes the loss suffered by the ridge waveguide, tapered segment, and slot waveguide. Our proposed device design can be used in integrated optical platforms, where the efficient coupling of light to slot waveguides is required. Whereas, in the second part, the coupler design is optimized at the mid-infrared of 3.392 µm for an evanescent field absorption methane gas sensor. Slot waveguide offers excessive light–matter interaction due to its strong mode confinement in the low index material. The evanescent field ratio of ${\sim}{0.73}$ is obtained for the optimized waveguide geometry. As a result, 3 dB decay in the transmitted power can be obtained at 60% of gas concentration present in the ambient medium.

© 2020 Optical Society of America

Full Article  |  PDF Article
More Like This
Efficient fiber coupler for vertical silicon slot waveguides

Haishan Sun, Antao Chen, Attila Szep, and Larry R. Dalton
Opt. Express 17(25) 22571-22577 (2009)

Low-loss silicon slot waveguides and couplers fabricated with optical lithography and atomic layer deposition

A. Säynätjoki, L. Karvonen, T. Alasaarela, X. Tu, T. Y. Liow, M. Hiltunen, A. Tervonen, G. Q. Lo, and S. Honkanen
Opt. Express 19(27) 26275-26282 (2011)

Efficient and tunable strip-to-slot fundamental mode coupling

Viphretuo Mere, Rakshitha Kallega, and Shankar Kumar Selvaraja
Opt. Express 26(1) 438-444 (2018)

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Figures (10)

You do not have subscription access to this journal. Figure files are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Tables (1)

You do not have subscription access to this journal. Article tables are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Equations (3)

You do not have subscription access to this journal. Equations are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved