Abstract

Sub-wavelength diffractive optics, commonly known as metasurfaces, have recently garnered significant attention for their ability to create ultra-thin flat lenses with a high numerical aperture. Several materials with different refractive indices have been used to create metasurface lenses (metalenses). In this paper, we analyze the role of refractive index on the performance of these metalenses. We employ both forward and inverse design methodologies to perform our analysis. We found that, while high-refractive-index materials allow for extreme reduction of the focal length, for moderate focal lengths and numerical aperture ($<0.6$), there is no appreciable difference in the focal spot size and focusing efficiency for metalenses made of different materials with refractive indices ranging between 1.2 and 3.43 in forward design, and 1.25 and 3.5 in inverse design.

© 2019 Optical Society of America

Imaging performance of a mid-infrared metalens with a machining error

Xinlei Ma, Weilin He, Lei Xin, Zhongming Yang, and Zhaojun Liu
Appl. Opt. 61(1) 60-68 (2022)

Achieving focal invariance in different background refractive indices through a dual-environment metalens

Huafeng Li, Baifu Zhang, Yan Wang, Zhixing Huang, Ji Xu, and Jianping Ding
Appl. Opt. 63(6) 1600-1605 (2024)

Broadband high-efficiency plasmonic metalens with negative dispersion characteristic

Yong-Qiang Liu, Yong Zhu, Hongcheng Yin, Jinhai Sun, Yan Wang, and Yongxing Che
Photon. Res. 12(4) 813-820 (2024)

Broadband achromatic polarization-insensitive metalens in the mid-wave infrared range

Yao Xie, Jianqi Zhang, Shiyu Wang, Delian Liu, and Xin Wu
Appl. Opt. 61(14) 4106-4112 (2022)

Design and studies on gradient index metasurfaces for broadband polarization-independent, subwavelength, and dichroic focusing

Saraswati Behera and Kyoungsik Kim
Appl. Opt. 58(18) 5128-5135 (2019)