Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

High-accuracy vibration sensor based on a Fabry–Perot interferometer with active phase-tracking technology

Not Accessible

Your library or personal account may give you access

Abstract

A novel position-sensitive Fabry–Perot interferometer was constructed with direct phase modulation by a built-in electro-optic modulator. Pure sinusoidal phase modulation of the light was produced, and the first harmonic of the interference signal was extracted to dynamically maintain the interferometer phase to the most sensitive point of the interferogram. Therefore, the minute vibration of the object was coded on the variation of the interference signal and could be directly retrieved by the output voltage of a photodetector. The operating principle and the signal processing method for active feedback control of the interference phase have been demonstrated in detail. The developed vibration sensor was calibrated through a high-precision piezo-electric transducer and tested by a nano-positioning stage under a vibration magnitude of 60 nm and a frequency of 300 Hz. The active phase-tracking method of the system provides high immunity against environmental disturbances. Experimental results show that the proposed interferometer can effectively reconstruct tiny vibration waveforms with subnanometer resolution, paving the way for high-accuracy vibration sensing, especially for micro-electro-mechanical systems/nano-electro-mechanical systems and ultrasonic devices.

© 2018 Optical Society of America

Full Article  |  PDF Article
More Like This
Quadrature phase detection based on an extrinsic Fabry–Pérot interferometer for vibration measurement

Zihua Zhang, Chunlei Jiang, Fuli Wang, Zhen Huang, Liqun Shen, and Chengwei Li
Opt. Express 28(22) 32572-32583 (2020)

High-accuracy sinusoidal phase-modulating self-mixing interferometer using an electro-optic modulator: development and evaluation

Wei Xia, Ming Wang, Zhenyu Yang, Wenhua Guo, Hui Hao, and Dongmei Guo
Appl. Opt. 52(4) B52-B59 (2013)

Fiber-optic Fabry–Perot pressure sensor based on low-temperature co-fired ceramic technology for high-temperature applications

Jia Liu, Pinggang Jia, Huixin Zhang, Xiaodan Tian, Hao Liang, Yingping Hong, Ting Liang, Wenyi Liu, and Jijun Xiong
Appl. Opt. 57(15) 4211-4215 (2018)

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Figures (8)

You do not have subscription access to this journal. Figure files are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Equations (6)

You do not have subscription access to this journal. Equations are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All rights reserved, including rights for text and data mining and training of artificial technologies or similar technologies.