Abstract

With the process nodes extending to sub-10-nm in advanced semiconductor manufacturing, the overlay requirements keep progressively scaling down, which makes it very important to measure overlay precisely for monitoring on-product performance. The overlay mark being asymmetrical when generated via the lithography process, this asymmetry will be slightly variated even in the same process or same lot, and it will bring overlay measurement error. In general, the wafer alignment data are used for correcting this overlay measurement error, utilizing its wavelengths and polarizations dependence. However, there is a residual error that cannot be removed because the structures of the wafer alignment mark and overlay mark are different and are affected by the process differently. In this paper, a new method is proposed for calibrating the overlay measurement error introduced by the asymmetric mark, which is based on the relationship between measurement data of the overlay mark and the single layer mark. The validity is verified by simulation with different types of asymmetric mark. It is very useful for improving overlay measurement accuracy and for understanding how the overlay measurement error is affected by the asymmetric mark.

© 2018 Optical Society of America

Alignment mark optimization for improving signal-to-noise ratio of wafer alignment signal

Juyou Du, Fengzhao Dai, and Xiangzhao Wang
Appl. Opt. 58(1) 9-14 (2019)

Optimized wavelength selection for diffraction-based overlay measurement by minimum asymmetry factor variation with finite-difference time-domain simulation

Hung-Chih Hsieh, Jui-Ming Cheng, and Yun-Chi Yeh
Appl. Opt. 61(6) 1389-1397 (2022)

Wafer-based aberration metrology for lithographic systems using overlay measurements on targets imaged from phase-shift gratings

Sven van Haver, Wim M. J. Coene, Koen D’havé, Niels Geypen, Paul van Adrichem, Laurens de Winter, Augustus J. E. M. Janssen, and Shaunee Cheng
Appl. Opt. 53(12) 2562-2582 (2014)

Infrared differential interference contrast microscopy for 3D interconnect overlay metrology

Yi-sha Ku, Deh-Ming Shyu, Yeou-Sung Lin, and Chia-Hung Cho
Opt. Express 21(16) 18884-18898 (2013)

Aberration evaluation of alignment optics in lithographic tools by use of a step-height structure highly sensitive to the asymmetry of an optical image

Hideki Ina and Mitsuo Takeda
Appl. Opt. 46(17) 3485-3492 (2007)