Abstract

In this work, we report the analysis, fabrication, and characterization of an optical cavity built using a Bragg-coated fiber (BCF) mirror and a metal-coated microelectromechanical systems (MEMS) slotted micromirror, where the latter allows transmission output from the cavity. Theoretical modeling, using Fourier optics analysis for the cavity response based on tracing the propagation of light back and forth between the mirrors, is presented. Detailed simulation analysis is carried out for the spectral response of the cavity under different design conditions. MEMS chips of the slotted micromirror are fabricated using deep reactive ion etching of a silicon-on-insulator substrate with different device-etching depths of 150 μm and 80 μm with aluminum and gold metal coating, respectively. The cavity is characterized as an optical filter using a BCF with reflectivity that is larger than 95% in a 300 nm range across the E-band and the L-band. Versatile filter characteristics were obtained for different values of the MEMS micromirror slit width and cavity length. A free spectral range (FSR) of about 33 nm and a quality factor of about 196 were obtained for a 5.5 μm width aluminum slit, while an FSR of about 148 nm and a quality factor of about 148 were obtained for a 1.5 μm width gold slit. The presented structure opens the door for wide spectral response transmission-type MEMS filters.

© 2018 Optical Society of America

In-plane coupled Fabry–Perot micro-cavities based on Si-air Bragg mirrors: a theoretical and practical study

Mohamed N. Ali, Yasser M. Sabry, Frédéric Marty, Tarik Bourouina, Khaled A. Kirah, and Diaa Khalil
Appl. Opt. 57(18) 5112-5120 (2018)

Fabrication and analysis of a Fabry-Perot cavity with a micromechanical wet-etching process

Min Xiang, Yan Min Cai, Ya Ming Wu, Jian Yi Yang, and Yue Lin Wang
Appl. Opt. 43(16) 3258-3262 (2004)

Analysis of metallic slotted micromirrors using modal decomposition and multiple reflections

Mohamed N. Ali, Yasser M. Sabry, Khaled A. Kirah, and Diaa Khalil
J. Opt. Soc. Am. B 39(2) 586-593 (2022)

Batch-producible MEMS fiber-optic Fabry–Perot pressure sensor for high-temperature application

Pinggang Jia, Hao Liang, Guocheng Fang, Jiang Qian, Fei Feng, Ting Liang, and Jijun Xiong
Appl. Opt. 57(23) 6687-6692 (2018)

Electrically tunable infrared filter based on the liquid crystal Fabry–Perot structure for spectral imaging detection

Huaidong Zhang, Afzal Muhammmad, Jun Luo, Qing Tong, Yu Lei, Xinyu Zhang, Hongshi Sang, and Changsheng Xie
Appl. Opt. 53(25) 5632-5639 (2014)