Abstract

Planetary rotation systems incorporating forward- and counter-rotating planets are used as a means of increasing coating-system capacity for large oblong substrates. Comparisons of planetary motion for the two types of rotating systems are presented based on point tracking for multiple revolutions as well as comparisons of quantitative thickness and uniformity. Counter-rotation system geometry is shown to result in differences in thin-film thickness relative to standard planetary rotation for precision optical coatings. This systematic error in thin-film thickness will reduce deposition yields for sensitive coating designs.

© 2017 Optical Society of America

Impact of non-integer planetary revolutions on the distribution of evaporated optical coatings

J. B. Oliver
Appl. Opt. 56(5) 1460-1463 (2017)

Analysis of a planetary-rotation system for evaporated optical coatings

J. B. Oliver
Appl. Opt. 55(30) 8550-8555 (2016)

Optimization of deposition uniformity for large-aperture National Ignition Facility substrates in a planetary rotation system

James B. Oliver and David Talbot
Appl. Opt. 45(13) 3097-3105 (2006)

Optimization of thickness uniformity of optical coatings on a conical substrate in a planetary rotation system

Chun Guo, Mingdong Kong, Cunding Liu, and Bincheng Li
Appl. Opt. 52(4) B26-B32 (2013)

Optimization of coating uniformity in an ion beam sputtering system using a modified planetary rotation method

Mark Gross, Svetlana Dligatch, and Anatoli Chtanov
Appl. Opt. 50(9) C316-C320 (2011)