Abstract
The reductions in the transmission of emission originating from a fluorophore dissolved in a polymer matrix due to light scattering were compared in two forms of planar waveguides used as luminescent solar concentrators: a thin film of poly(methylmethacrylate) (PMMA) spin-coated on a glass plate and a solid PMMA plate of the same dimensions. The losses attributable to light scattering encountered in the waveguide consisting of the thin film of polymer coated on a glass plate were not detectable within experimental uncertainty, whereas the losses in the solid polymer plate were significant. The losses in the solid plate are interpreted as arising from light-scattering centers comprising minute bubbles of vapor/gas, incomplete polymerization or water clusters that are introduced during or after the thermally induced polymerization process.
© 2017 Optical Society of America
Full Article | PDF ArticleMore Like This
Michael G. Debije, Paul P. C. Verbunt, Brenda C. Rowan, Bryce S. Richards, and Theo L. Hoeks
Appl. Opt. 47(36) 6763-6768 (2008)
Lindsay R. Wilson, Brenda C. Rowan, Neil Robertson, Omar Moudam, Anita C. Jones, and Bryce S. Richards
Appl. Opt. 49(9) 1651-1661 (2010)
Otmar M. ten Kate, Koen M. Hooning, and Erik van der Kolk
Appl. Opt. 53(23) 5238-5245 (2014)