Add to BibSonomyAbstract
A phase-only hologram modulates the phase of the incident light and diffracts it efficiently with low energy loss because of the minimum absorption. Much research attention has been focused on how to generate phase-only holograms, and little work has been done to understand the effect and limitation of their partial implementation, possibly due to physical defects and constraints, in particular as in the practical situations where a phase-only hologram is confined or needs to be sliced or tiled. The present study simulates the effect of masking phase-only holograms on the quality of reconstructed images in three different scenarios with different filling factors, filling positions, and illumination intensity profiles. Quantitative analysis confirms that the width of the image point spread function becomes wider and the image quality decreases, as expected, when the filling factor decreases, and the image quality remains the same for different filling positions as well. The width of the image point spread function as derived from different filling factors shows a consistent behavior to that as measured directly from the reconstructed image, especially as the filling factor becomes small. Finally, mask profiles of different shapes and intensity distributions are shown to have more complicated effects on the image point spread function, which in turn affects the quality and textures of the reconstructed image.
© 2016 Optical Society of America
Full Article | PDF ArticleMore Like This
Chuan Shen, Yifei Qi, Shiqi Lv, Bin Wang, and Sui Wei
Appl. Opt. 61(6) 1507-1515 (2022)
Jianfeng Zuo, Junmin Leng, and Yiping Fu
Appl. Opt. 61(35) 10519-10527 (2022)
P.W.M. Tsang, Y.T. Chow, and T.-C. Poon
Opt. Express 24(20) 23390-23395 (2016)