Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

Controlling the optical fiber output beam profile by focused ion beam machining of a phase hologram on fiber tip

Not Accessible

Your library or personal account may give you access

Abstract

A phase hologram was machined on an optical fiber tip using a focused ion beam (FIB) system so that a ring-shaped beam emerges from the fiber tip. The fiber used for this work was a commercial single-mode optical fiber patch cable for a design wavelength of 633 nm with a germanosilicate core. The ring-shaped beam was chosen to ensure a simple geometry in the required phase hologram, though the Gerchberg–Saxton algorithm can be used to calculate a hologram for an arbitrary beam shape. The FIB machining took approximately 45 min at 30 kV and 200 pA. The radius of the resulting ring beam was 0.083 m at 1 m standoff, as compared to 0.1 m as was initially desired. Results suggest that this imaging technique may provide a basis for a beam-shaping method with several advantages over the current commercial solutions, having permanent alignment, compactness, and mechanical robustness. However, it would appear that minimizing the speckle pattern will remain a critical challenge for this technique to become widely implemented.

© 2015 Optical Society of America

Full Article  |  PDF Article
More Like This
Simultaneous measurement of temperature and refractive index using focused ion beam milled Fabry-Perot cavities in optical fiber micro-tips

Ricardo M. André, Stephen C. Warren-Smith, Martin Becker, Jan Dellith, Manfred Rothhardt, M. I. Zibaii, H. Latifi, Manuel B. Marques, Hartmut Bartelt, and Orlando Frazão
Opt. Express 24(13) 14053-14065 (2016)

Ion beam machining error control and correction for small scale optics

Xuhui Xie, Lin Zhou, Yifan Dai, and Shengyi Li
Appl. Opt. 50(27) 5221-5227 (2011)

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Figures (7)

You do not have subscription access to this journal. Figure files are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Equations (5)

You do not have subscription access to this journal. Equations are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved