Abstract
In this paper, stimulated Raman scattering (SRS) signals have been recorded by an optical imaging technique that is based on spatial modulation. A frequency doubled -switched Nd:YAG laser (532 nm) was used to pump a polymethyl methacrylate (PMMA) target. The frequency tripled (355 nm) beam from the same laser was used to pump an optical parametric oscillator (OPO). The Stokes beam (from the OPO) was tuned to 631.27 nm so that the frequency difference between the pump and the Stokes beams fit the Raman active vibrational mode of the PMMA molecule (). The pump beam has been spatially modulated with fringes produced in a Michelson interferometer. The pump and the Stokes beams were overlapped on the target resulting in a gain of the Stokes beam of roughly 2.5% and a corresponding loss of the pump beam through the SRS process. To demodulate the SRS signal, two images of the Stokes beam without and with the pump beam fringes present were recorded. The difference between these two images was calculated and Fourier transformed. Then, the gain of the Stokes beam was separated from the background in the Fourier domain. The results show that spatial modulation of the pump beam is a promising method to separate the weak SRS signal from the background.
© 2015 Optical Society of America
Full Article | PDF ArticleMore Like This
Eynas Amer, Per Gren, Stefan Edenharder, and Mikael Sjödahl
Appl. Opt. 55(13) 3429-3434 (2016)
Eynas Amer, Per Gren, Stefan Edenharder, and Mikael Sjödahl
Opt. Express 24(9) 9984-9993 (2016)
Eynas Amer, Per Gren, and Mikael Sjödahl
Appl. Opt. 56(36) 10016-10023 (2017)