Abstract

A simple method based on air etalons of a transparent cavity is proposed to simultaneously measure the group refractive index and thickness of a transparent optical plate by spectral domain low coherence interferometry. In this method, only a single beam path is needed in contrast to the two beam paths, the reference and sample arms, of the conventional Michelson interferometer. An empty cavity is first constructed in the beam path by two glass plates. Then the transparent plate under test is inserted into the cavity, so that two air gaps are formed in the cavity. A beam of light of low coherence length is then transmitted through the cavity in the normal direction. Measurements of the reflected waves by the air gaps before and after the sample plate is put into the cavity allow us to determine the group refractive index ($n_g$) and thickness ($d$) of the sample simultaneously. The relative precision of the results for $d$ and $n_g$ are both approximately $7\times {10}^{-4}$.

© 2014 Optical Society of America

Dispersion-insensitive measurement of thickness and group refractive index by low-coherence interferometry

Dominic F. Murphy and Dónal A. Flavin
Appl. Opt. 39(25) 4607-4615 (2000)

Self-referenced spectral interferometry for simultaneous measurements of thickness and refractive index

Jihoon Na, Hae Young Choi, Eun Seo Choi, ChangSu Lee, and Byeong Ha Lee
Appl. Opt. 48(13) 2461-2467 (2009)

Interference enhancement in spectral domain interferometric measurements on transparent plate

Ke Zhang, Li Tao, Wenkai Cheng, Jianhua Liu, and Zhongping Chen
Appl. Opt. 53(26) 5906-5911 (2014)

Simultaneous thickness and group index measurement with a single arm low-coherence interferometer

S. C. Zilio
Opt. Express 22(22) 27392-27397 (2014)

Simultaneous measurement of group and phase refractive indices and physical thickness of transparent plates with low coherence Fabry–Perot interferometry

David J. Bang, Yudeuk Kim, Yoohan Kim, Myung-Jik Kim, and Kyong Hon Kim
Appl. Opt. 57(16) 4428-4433 (2018)