## Abstract

We present the results of a feasibility study in which a simple, automated, and unsupervised algorithm, which we call the arrange and average algorithm, is used to infer microphysical parameters (complex refractive index, effective radius, total number, surface area, and volume concentrations) of atmospheric aerosol particles. The algorithm uses backscatter coefficients at 355, 532, and 1064 nm and extinction coefficients at 355 and 532 nm as input information. Testing of the algorithm is based on synthetic optical data that are computed from prescribed monomodal particle size distributions and complex refractive indices that describe spherical, primarily fine mode pollution particles. We tested the performance of the algorithm for the “3 backscatter $(\beta )+2$ extinction ($\alpha $)” configuration of a multiwavelength aerosol high-spectral-resolution lidar (HSRL) or Raman lidar. We investigated the degree to which the microphysical results retrieved by this algorithm depends on the number of input backscatter and extinction coefficients. For example, we tested “$3\beta +1\alpha $,” “$2\beta +1\alpha $,” and “$3\beta $” lidar configurations. This arrange and average algorithm can be used in two ways. First, it can be applied for quick data processing of experimental data acquired with lidar. Fast automated retrievals of microphysical particle properties are needed in view of the enormous amount of data that can be acquired by the NASA Langley Research Center’s airborne “$3\beta +2\alpha $” High-Spectral-Resolution Lidar (HSRL-2). It would prove useful for the growing number of ground-based multiwavelength lidar networks, and it would provide an option for analyzing the vast amount of optical data acquired with a future spaceborne multiwavelength lidar. The second potential application is to improve the microphysical particle characterization with our existing inversion algorithm that uses Tikhonov’s inversion with regularization. This advanced algorithm has recently undergone development to allow automated and unsupervised processing; the arrange and average algorithm can be used as a preclassifier to further improve its speed and precision. First tests of the performance of arrange and average algorithm are encouraging. We used a set of 48 different monomodal particle size distributions, 4 real parts and 15 imaginary parts of the complex refractive index. All in all we tested 2880 different optical data sets for 0%, 10%, and 20% Gaussian measurement noise (one-standard deviation). In the case of the “$3\beta +2\alpha $” configuration with 10% measurement noise, we retrieve the particle effective radius to within 27% for 1964 (68.2%) of the test optical data sets. The number concentration is obtained to 76%, the surface area concentration to 16%, and the volume concentration to 30% precision. The “$3\beta $” configuration performs significantly poorer. The performance of the “$3\beta +1\alpha $” and “$2\beta +1\alpha $” configurations is intermediate between the “$3\beta +2\alpha $” and the “$3\beta $.”

© 2014 Optical Society of America

Full Article | PDF Article**OSA Recommended Articles**

Eduard Chemyakin, Sharon Burton, Alexei Kolgotin, Detlef Müller, Chris Hostetler, and Richard Ferrare

Appl. Opt. **55**(9) 2188-2202 (2016)

Detlef Müller, Eduard Chemyakin, Alexei Kolgotin, Rich A. Ferrare, Chris A. Hostetler, and Anton Romanov

Appl. Opt. **58**(18) 4981-5008 (2019)

Alexei Kolgotin, Detlef Müller, Eduard Chemyakin, and Anton Romanov

Appl. Opt. **55**(34) 9850-9865 (2016)