Abstract
We demonstrate a simple design to enhance the performance of a multiwavelength Brillouin–Raman fiber laser by capturing the residual Raman pump power (RPP) from the laser cavity using a wavelength-selective coupler. The performance parameters of the laser system are investigated and compared with the conventional design under the same input design parameters. Both laser systems at a RPP of 375 mW can generate up to 33 Stokes lines with an equal channel spacing of 0.08 nm; however, the tunability of the laser without injection of residual RPP is 25% higher than the conventional laser structure. In addition, for a laser system without residual RPP injection, increasing the RPP improves the laser performance and generates up to 42 Stokes lines with a tunability of 24.5 nm, from 1570 to 1594.5 nm, at 475 mW. In contrast, the laser system with a residual RPP has the worst performance as the pump power is increased, and generates only nine Stokes lines with a tuning range of 5 nm at the same RPP of 475 mW.
© 2014 Optical Society of America
Full Article | PDF ArticleMore Like This
A. K. Abass, M. H. Al-Mansoori, M. Z. Jamaludin, F. Abdullah, and T. F. Al-Mashhadani
Appl. Opt. 52(16) 3764-3769 (2013)
Mohd. Zamani Zulkifli, Harith Ahmad, Jaffar Mohamed Taib, Farah Diana Muhammad, Kaharudin Dimyati, and Sulaiman Wadi Harun
Appl. Opt. 52(16) 3753-3756 (2013)
H. Ahmad, M. Z. Zulkifli, N. A. Hassan, and S. W. Harun
Appl. Opt. 51(11) 1811-1815 (2012)