Phase shifting interferometry relies on sets of interferograms taken at multiple known phase offsets to deduce the instantaneous phase of a quasi-static fringe pattern. The traditional method for introducing these phase shifts has been either to step a mirror, and measure the fringe pattern at each step, or to scan a mirror, integrating the fringe pattern for discrete time intervals while the fringes “move” on the detector. A stepping mirror eliminates this fringe smear but has typically required a closed-loop controller to ensure that the optical path introduced is accurately known. Furthermore, implementing rapid stepping of a moderately sized optic can prove difficult if the fringe phase needs to be measured on a short time scale. We report results demonstrating very fast () and precise phase shifting using a piezomodulated mirror operated in open-loop without any position feedback. Our method exploits the use of a synthetic driving waveform that is optimized to match the complex frequency response of the modulator and its supported optic. For phase measurements in the near-infrared at 2.15 μm, and with a time between steps as small as 0.2 ms, we report errors below in the desired position of our optic, i.e., an effective optical path difference error of . For applications in near-infrared stellar interferometry, this implies an enhancement in the fringe-tracking sensitivity of roughly 20% (in the photon-limited regime) over that which is conventionally realized using a swept mirror.
© 2013 Optical Society of AmericaFull Article | PDF Article
OSA Recommended Articles
Yitping Kok, Michael J. Ireland, J. Gordon Robertson, Peter G. Tuthill, Benjamin A. Warrington, and William J. Tango
Appl. Opt. 52(12) 2808-2814 (2013)
Appl. Opt. 44(9) 1577-1581 (2005)
Michael Ney, Avner Safrani, and Ibrahim Abdulhalim
Opt. Lett. 42(4) 719-722 (2017)