Abstract
Photonic crystal fibers (PCFs) are widely used in all-fiber, high-power lasers and supercontinuum sources. However, the splice loss between PCFs and conventional fibers limits its development. Grin fibers and coreless fibers were used as a fiber lens to achieve low-loss, high-strength splicing between PCFs and single-mode fibers (SMFs). The beam propagation method was used to optimize the lengths of grin fibers and coreless fibers for a minimum splice loss. The splice loss changing with the lengths of grin fiber, coreless fiber, and the air-hole collapsed region was systematically studied theoretically and experimentally. Ultimately, a minimum splice loss of 0.26 dB at 1064 nm was realized between a high-nonlinear PCF and a conventional SMF with this method.
© 2012 Optical Society of America
Full Article | PDF ArticleMore Like This
Tao Zhu, Fufeng Xiao, Laicai Xu, Min Liu, Ming Deng, and Kin Seng Chiang
Opt. Express 20(22) 24465-24471 (2012)
Yiping Wang, Hartmut Bartelt, Sven Brueckner, Jens Kobelke, Manfred Rothhardt, Klaus Mörl, Wolfgang Ecke, and Reinhardt Willsch
Opt. Express 16(10) 7258-7263 (2008)
Joo Hin Chong and M. K. Rao
Opt. Express 11(12) 1365-1370 (2003)