Abstract
Mixed-mode grinding occurs when a bound abrasive works in both brittle and ductile regimes simultaneously. Substrates ground in a mixed-mode behavior show reduced curvature induced by compressive surface forces than loose abrasives as demonstrated by observing the Twyman effect. This reduction in bending corresponds to reduced subsurface damage. This is verified by controlled acid etching, which shows the exponential decay of the compressive force per unit length. Loose abrasive particles, added to maintain pad wear due to low pressures, have no effect on the measured stresses. If loose abrasive wear ceases, the pads glaze. Glazing creates near-specular surfaces while reducing measurable stress. These effects for borosilicate glass and Trizact grinding pads are explored and quantified.
©2012 Optical Society of America
Full Article | PDF ArticleMore Like This
John C. Lambropoulos, Su Xu, Tong Fang, and Donald Golini
Appl. Opt. 35(28) 5704-5713 (1996)
Donald Golini and Stephen D. Jacobs
Appl. Opt. 30(19) 2761-2777 (1991)
John C. Lambropoulos, Su Xu, and Tong Fang
Appl. Opt. 36(7) 1501-1516 (1997)