Abstract
We describe the optimization of a mounting system for the infrared (IR) optics of a spaceborne inter ferometer working in the temperature range between and . The concept is based on an aluminum alloy frame with designed mechanical compliance, which allows for compensation of the different coefficient of thermal expansion between the optics and the holder; at the same time, the system provides for the high stiffness required to reach natural frequencies above , which are mandatory in most space missions. Thermal adapters with properly chosen thermomechanical characteristics are interposed between the metallic structure and the lens, so as to reduce the interface stresses on the mechanically weak IR material, due to both the thermoelastic and acceleration loads. With the proposed mount, the competitive requirements of stiffness and stress-free mounting can be matched in wide temperature ranges. The case study of the interferometer of a miniaturized Fourier transform IR spectrometer is presented.
© 2010 Optical Society of America
Full Article | PDF ArticleMore Like This
Hidehiro Kaneda, Masataka Naitoh, Tadashi Imai, Yoshio Tange, Keigo Enya, Haruyoshi Katayama, Kenta Maruyama, Takao Nakagawa, Takashi Onaka, Masahiro Suganuma, Ryoko Kano, Yuichi Kiriyama, Tatsuya Mori, and Ai Takahashi
Appl. Opt. 49(20) 3941-3948 (2010)
Xinfeng Yu, Mingyang Ni, Wei Zhang, Yongxin Sui, and Shuo Qin
Appl. Opt. 53(18) 4079-4084 (2014)
Zhou Feng, Yu Jie, Wang Li-Ping, Li Yuan-Ming, Zhang Hai-Tao, Man Quan, Li Qiang, Bi Ran, Wang Hui, and Jin Chun-Shui
Appl. Opt. 58(34) 9370-9375 (2019)