Abstract

Current accurate applications of reflection interference contrast microscopy (RICM) are limited to known geometries; when the geometry of the object is unknown, an approximated fringe spacing analysis is usually performed. To complete an accurate RICM analysis in more general situations, we review and improve the formulation for intensity calculation based on nonplanar interface image formation theory and develop a method for its practical implementation in wedges and convex surfaces. In addition, a suitable RICM model for an arbitrary convex surface, with or without a uniform layer such as a membrane or ultrathin coating, is presented. Experimental work with polymer vesicles shows that the coupling of the improved RICM image formation theory, the calculation method, and the surface model allow an accurate reconstruction of the convex bottom shape of an object close to the substrate by fitting its experimental intensity pattern.

© 2010 Optical Society of America

Microinterferometry: three-dimensional reconstruction of surface microtopography for thin-film and wetting studies by reflection interference contrast microscopy (RICM)

Gerald Wiegand, Klaus R. Neumaier, and Erich Sackmann
Appl. Opt. 37(29) 6892-6905 (1998)

Stabilizing method for reflection interference contrast microscopy

Kipom Kim and Omar A. Saleh
Appl. Opt. 47(12) 2070-2075 (2008)

Influence of surface reflective properties on differential interference contrast microscopy

Olivier Theodoly, Sylvain Gabriele, and Marie-Pierre Valignat
Opt. Express 16(7) 4547-4558 (2008)

Interference of light reflected from a convex face

T. Kumazawa, T. Sakamoto, and S. Shida
Appl. Opt. 23(14) 2423-2426 (1984)

Nomarski differential interference contrast microscopy for surface slope measurements: an examination of techniques

J. S. Hartman, R. L. Gordon, and D. L. Lessor
Appl. Opt. 20(15) 2665-2669 (1981)