Abstract

Night vision systems in vehicles are a new emerging technology. A crucial problem in active (laser-based) systems is distortion of images by saturation and blooming due to strong retroreflections from road signs. We quantify this phenomenon. We measure the Mueller matrices and the polarization state of the reflected light from three different types of road sign commonly used. Measurements of the reflected intensity are also taken with respect to the angle of reflection. We find that different types of sign have different reflection properties. It is concluded that the optimal solution for attenuating the retroreflected intensity is using a linear polarized light source and a linear polarizer with perpendicular orientation (with regard to the source) at the detector. Unfortunately, while this solution performs well for two types of road sign, it is less efficient for the third sign type.

© 2008 Optical Society of America

Range gated active night vision system for automobiles

Ofer David, Norman S. Kopeika, and Boaz Weizer
Appl. Opt. 45(28) 7248-7254 (2006)

ASA-BiSeNet: improved real-time approach for road lane semantic segmentation of low-light autonomous driving road scenes

Yang Liu, Fulong Yi, Yuhua Ma, and Yongfu Wang
Appl. Opt. 62(19) 5224-5235 (2023)

Characterizing polarization management in a p-HMPD system

Rui Zhang and Hong Hua
Appl. Opt. 47(4) 512-522 (2008)

Increased range and contrast in fog with circularly polarized imaging

John D. van der Laan, Brian J. Redman, Jacob W. Segal, Karl Westlake, Jeremy B. Wright, and Brian Z. Bentz
Appl. Opt. 62(10) 2577-2586 (2023)

On-site road properties evaluation for dry and wet asphalt roads using an imaging luminance measurement device

Cheng-Hsien Chen, Shau-Wei Hsu, Tsung-Hsun Yang, and Ching-Cherng Sun
Opt. Continuum 2(8) 1752-1762 (2023)