Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

Photometric methods for determining the optical constants and the thicknesses of thin absorbing films: selection of a combination of photometric quantities on the basis of error analysis

Not Accessible

Your library or personal account may give you access

Abstract

We select the best combinations of spectrophotometric quantities for the most accurate determination of the optical constants, n (refractive index), k (absorption coefficient), and the thicknesses of thin absorbing films. The basic comparative criteria used are the maximum absolute errors in the determination of n, k, and d that result from experimental errors in photometric measurements and in the optical constants of the substrates. We studied all possible combinations of photometric quantities T, Tsθ, Tpθ, R, Rsθ, Rpθ, R m, Rmsθ, and Rmpθ at 0° < θ ≤ 70°, where T denotes transmission; R, reflection; the subscripts s and p, s- and p-polarized light; m, reflection from a thin film coated upon an opaque substrate; and superscript θ, the angle of incidence of light. The absence of the subscripts s and p implies nonpolarized light; that of the subscript m, a nonabsorbing substrate; and that of superscript θ, normally incident light. The error analysis that is made admits the following conclusions: (1) The best double combinations are (TR), (TR m), (TRp70), and (TRmp70); (2) the best triple combinations are (TRR m), (TRRp70), (TRRmp70), (TR m Rp70), and (TR m Rmp70); (3) the methods indicated above, suitably combined, are quite sufficient to provide the maximum accuracy and reliability of n, k, and d for all practical situations; (4) TRR methods based on measurements with obliquely polarized light are more suitable for thin films with n < 1, such as some metal films; (5) the regions of n, k, and d/λ with the highest and the lowest accuracies do not overlap in either the TR or the TRR methods. Hence more combinations, preferably all, should be applied for the most accurate determination of n, k (and d), and the errors should be evaluated as a criterion for the best combination.

© 2001 Optical Society of America

Full Article  |  PDF Article
More Like This
Analysis of errors in thin-film optical parameters derived from spectrophotometric measurements at normal light incidence

Ivan Konstantinov, Tzewatanka Babeva, and Snejana Kitova
Appl. Opt. 37(19) 4260-4267 (1998)

Determination of thickness and optical constants of thin films from photometric and ellipsometric measurements

Eduardo Elizalde, Jean Marc Frigerio, and Josette Rivory
Appl. Opt. 25(24) 4557-4561 (1986)

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Figures (10)

You do not have subscription access to this journal. Figure files are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Tables (1)

You do not have subscription access to this journal. Article tables are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Equations (5)

You do not have subscription access to this journal. Equations are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved