In-fiber strain characterization of fiber-optic connector assemblies by Bragg grating sensors

Abstract

In-fiber Bragg grating sensors were used to study mechanical strain in optical fibers that were terminated in standard-termination and ribbon connectors. Our findings indicate that terminated sensors experience a compressive strain whose magnitude depends on the cure profile of the epoxy encapsulant used in these connectors. Anneal treatments on these connectors generally reduce the mechanical stress by inducing stress relaxation in the encapsulant layer. These experiments demonstrate the viability of in-fiber sensors to characterize fiber-optic connector assemblies during and following termination.

© 2000 Optical Society of America

State-of-strain evaluation with fiber Bragg grating rosettes: application to discrimination between strain and temperature effects in fiber sensors

Sylvain Magne, Stéphane Rougeault, Manuel Vilela, and Pierre Ferdinand
Appl. Opt. 36(36) 9437-9447 (1997)

Fiber Bragg grating strain sensor demodulation with quadrature sampling of a Mach–Zehnder interferometer

Minho Song, Shizhuo Yin, and Paul B. Ruffin
Appl. Opt. 39(7) 1106-1111 (2000)

Fiber Bragg grating sensor for simultaneous measurement of displacement and temperature

Youlong Yu, Hwayaw Tam, Wenghong Chung, and Muhtesem Suleyman Demokan
Opt. Lett. 25(16) 1141-1143 (2000)

Bending insensitive sensors for strain and temperature measurements with Bragg gratings in Bragg fibers

Ningliang Liu, Yuhua Li, Ying Wang, Haiyan Wang, Wenbin Liang, and Peixiang Lu
Opt. Express 19(15) 13880-13891 (2011)

Fabrication and characterization of polycarbonate microstructured polymer optical fibers for high-temperature-resistant fiber Bragg grating strain sensors

Andrea Fasano, Getinet Woyessa, Pavol Stajanca, Christos Markos, Alessio Stefani, Kristian Nielsen, Henrik K. Rasmussen, Katerina Krebber, and Ole Bang
Opt. Mater. Express 6(2) 649-659 (2016)