Effect of the differential geometric form factor on differential absorption lidar measurements with topographical targets

Abstract

When the integrated differential absorption lidar (DIAL) technique is used to perform concentration measurements over long distances, the alignment between on and off laser beams becomes important. Here, through analysis of alignment error and of the corresponding differential geometric form factor, the effect of misalignment between off and on lines on performance of integrated concentration measurements by a coaxial DIAL system is considered.

© 1999 Optical Society of America

Effect of differential spectral reflectance on DIAL measurements using topographic targets

William B. Grant
Appl. Opt. 21(13) 2390-2394 (1982)

Analytical function for lidar geometrical compression form-factor calculations

Kamil Stelmaszczyk, Marcella Dell’Aglio, Stanislaw Chudzyński, Tadeusz Stacewicz, and Ludger Wöste
Appl. Opt. 44(7) 1323-1331 (2005)

Water vapor differential absorption lidar development and evaluation

E. V. Browell, T. D. Wilkerson, and T. J. Mcilrath
Appl. Opt. 18(20) 3474-3483 (1979)

Dual differential absorption lidar for the measurement of atmospheric SO₂ of the order of parts in 10⁹

Takashi Fujii, Tetsuo Fukuchi, Naohiko Goto, Koshichi Nemoto, and Nobuo Takeuchi
Appl. Opt. 40(6) 949-956 (2001)

Sensitivity analysis of differential absorption lidar measurements in the mid-infrared region

Paolo Francesco Ambrico, Aldo Amodeo, Paolo Di Girolamo, and Nicola Spinelli
Appl. Opt. 39(36) 6847-6865 (2000)