Abstract

A novel, to our knowledge, optical readout for optical storage with phase jump is presented. In the readout scheme two coherent laser beams are focused on an optical disk with one beam scanning along pits and the other along land. When the probe beam scans across a pit, two phase jumps will take place in the interference resultant of the two beams if the phase difference between two beams is prefixed at π, resulting in a phase pulse of 180 deg. The slopes of rising and falling edges of the phase pulse are infinite, and they are not affected by the intensity variation of the light source, stray light, and the vibration of the disk. Therefore this phase pulse can be used to read out the information on an optical disk. The use of phase jump will improve the signal-to-noise ratio of the readout signal and enhance the density of optical storage. An optical readout with phase jump was constructed. Both the theoretical design and the experimental verification are conducted. Experimental results show that the proposed optical readout is feasible.

© 1999 Optical Society of America

Method for edge detection based on phase jump in a differential interferometer

Weidong Zhou and Lilong Cai
Appl. Opt. 38(1) 152-159 (1999)

Superresolution near-field readout in phase-change optical disk data storage

Chubing Peng
Appl. Opt. 40(23) 3922-3931 (2001)

Edge location by use of optical phase variation

Weidong Zhou and Lilong Cai
Appl. Opt. 39(16) 2569-2576 (2000)

Readout characteristics of a near-field optical probe as a data-storage readout device: submicrometer scan height and resolution

Hiroshi Yoshikawa, Toshifumi Ohkubo, Kenji Fukuzawa, Laurence Bouet, and Manabu Yamamoto
Appl. Opt. 38(5) 863-868 (1999)

Evaluation of partial-response maximum-likelihood detection for phase-change optical data storage

Chubing Peng and M. Mansuripur
Appl. Opt. 38(20) 4394-4405 (1999)