Abstract

Sputter-deposited aluminum (Al) film surface morphologies were studied with a new nondestructive method that incorporates a high-resolution phase-measuring laser interferometric microscope. Good correlation is obtained between rms roughness and reflectivity for various conditions of temperature and argon gas pressure. It should be noted that the rms roughness is much more sensitive than reflectivity when reflectivity exceeds 90%. A drastic change is observed in the temperature dependence of the rms roughness and the skewness at 200 °C. As a result there are changes in Al grain sizes and surface morphologies based on concomitant scanning electron microscope observations. We found that the rms roughness value depends on the resolution of the objective especially when the Al grain sizes are comparable to the resolution.

© 1996 Optical Society of America

Granularity in ion-beam-sputtered TiO₂ films

N. Albertinetti and H. T. Minden
Appl. Opt. 35(28) 5620-5625 (1996)

Light Scattering from Fused Polycrystalline Aluminum Oxide Surfaces

D. H. Hensler
Appl. Opt. 11(11) 2522-2528 (1972)

Measurement of surface roughness of thin films by a hybrid interference microscope with different phase algorithms

Chuen-Lin Tien, Kuo-Chang Yu, Tsung-Yo Tsai, Chern-Sheng Lin, and Chi-Yuan Li
Appl. Opt. 53(29) H213-H219 (2014)

Characterization of the topography of vacuum-deposited films. 1: Light scattering

Maarten J. Verkerk and Ivo J. M. M. Raaymakers
Appl. Opt. 25(20) 3602-3609 (1986)

Determination of grain size in indium tin oxide films from transmission measurements

J. P. Lehan
Appl. Opt. 35(25) 5048-5051 (1996)