Abstract

The infrared emission properties of an electrically heated single resistive element produced by ion implantation of diamond is reported. It is found that good contrast can be obtained between the implanted and unimplanted regions of the diamond mainly because of the increased emissivity following implantation. The infrared output is stronger if the diamond is viewed with the implanted surface facing away from the detector. The possible utilization of diamond-based pixels in infrared scene generation is discussed.

© 1995 Optical Society of America

Planarizing technique for ion-beam polishing of diamond films

D. F. Grogan, T. Zhao, B. G. Bovard, and H. A. Macleod
Appl. Opt. 31(10) 1483-1487 (1992)

Fabrication of poly(vinyl carbazole) waveguides by oxygen ion implantation

Fatima Ghailane, Gurusamy Manivannan, Émile J. Knystautas, and Roger A. Lessard
J. Opt. Soc. Am. A 12(8) 1683-1686 (1995)

Tailoring the optical constants of diamond by ion implantation

M. A. Draganski, E. Finkman, B. C. Gibson, B. A. Fairchild, K. Ganesan, N. Nabatova-Gabain, S. Tomljenovic-Hanic, A. D. Greentree, and S. Prawer
Opt. Mater. Express 2(5) 644-649 (2012)

Oxygen–ion beam polishing of a 5-cm-diameter diamond film

Bertrand G. Bovard, Tianji Zhao, and H. Angus Macleod
Appl. Opt. 31(13) 2366-2369 (1992)

Mid-infrared ZnSe ridge waveguides fabricated by swift Kr⁸⁺ ion irradiation combined with precise diamond blade dicing

Yazhou Cheng, Jinman Lv, and Feng Chen
Opt. Mater. Express 5(10) 2292-2299 (2015)