Abstract

Threshold radiant exposures for pulsed holmium laser ablation of tissue were measured with a high-speed framing camera. The effects of laser irradiance and beam size on ablation threshold were investigated. Threshold radiant exposure decreased with increasing laser irradiance over the range of 10⁵–10⁷ W/cm². Over the range of spot sizes examined (243-970 μm) an increase in the laser beam diameter reduced the laser irradiance required for ablation. At larger spot sizes the ablation event was occasionally initiated from multiple sites. These results suggest that the rate of energy deposition and laser-beam geometry affect the events preceding the onset of ablation and should be considered when pulsed laser ablation of tissue is modeled or quantified.

© 1993 Optical Society of America

Tissue tearing caused by pulsed laser-induced ablation pressure

Joseph P. Cummings and Joseph T. Walsh
Appl. Opt. 32(4) 494-503 (1993)

Combination of fiber-guided pulsed erbium and holmium laser radiation for tissue ablation under water

Hans Pratisto, Martin Frenz, Michael Ith, Hans J. Altermatt, E. Duco Jansen, and Heinz P. Weber
Appl. Opt. 35(19) 3328-3337 (1996)

Role of tissue optics and pulse duration on tissue effects during high-power laser irradiation

Steven L. Jacques
Appl. Opt. 32(13) 2447-2454 (1993)

Influence of water environment on holmium laser ablation performance for hard tissues

Tao Lü, Qing Xiao, and Zhengjia Li
Appl. Opt. 51(13) 2505-2514 (2012)

Dynamic optical properties of collagen-based tissue during ArF excimer laser ablation

G. H. Pettit, M. N. Ediger, and R. P. Weiblinger
Appl. Opt. 32(4) 488-493 (1993)