Abstract

Highly efficient blue electrophosphorescence in organic light-emitting device (OLED) has been achieved by employing a weak electron transporting material compacting layer without an additional energy barrier for charge transporting by inserting a hole blocking layer between the electron transporting layer and the emitting material layer. Iridium (III) bis[(4,6-difluorophenyl)-pyridinato-N, C2’]picolinate (FIrpic) was used as the phosphorescent emitter, and over 20% of maximum external quantum efficiency was achieved. This result contradicts the conventional notion that a weaker ET material in an OLED results in lower efficiency, which shows an alternative way to design electron transporting materials for blue electrophosphorescent devices.

© 2011 Optical Society of America

PDF Article
More Like This
Efficient green and blue electrophosphorescent light-emitting diodes using a combination of solution- and vacuum-processed materials

Wojciech Haske, Sung-Jin Kim, Denke Cai, Ehsan M. Najafabadi, Canek Fuentes-Hernandez, Bernard Kippelen, Julie Leroy, Carlos Zuniga, Yadong Zhang, Annabelle Scarpaci, Huifang Li, Lingyun Zhu, John S. Sears, Stephen Barlow, Jean-Luc Brédas, and Seth R. Marder
SDWC5 Solid-State and Organic Lighting (SOLED) 2011

Highly Efficient, Charge Balanced Blue Phosphorescent OLEDs Employing Wide Band Gap Host with p-i-n architecture

Neetu Chopra, Jaewon Lee, and Franky So
CMR2 Conference on Lasers and Electro-Optics (CLEO) 2008

High Efficiency White Organic Light-Emitting Devices

Sang-Hyun Eom, Edward Wrzesniewski, Jaewon Lee, Neetu Chopra, Debasis Bera, Paul H. Holloway, Franky So, and Jiangeng Xue
SDWC6 Solid-State and Organic Lighting (SOLED) 2011

References

You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access OSA Member Subscription