Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

Thermo-Mechanical Analysis of a Cantilever Mode Converter Between Single-Mode Fiber and Si Waveguide

Not Accessible

Your library or personal account may give you access

Abstract

We study temperature-induced stresses and misalignments in a cantilevered mode converter used to couple light between single-mode fiber and a PIC. We show that the design with UV-cured epoxy as index-matching clad exhibits higher stresses and larger displacements.

© 2016 Optical Society of America

PDF Article
More Like This
Polymer waveguide based spot-size converter for low-loss coupling between Si photonics chips and single-mode fibers

Kazuki Yasuhara, Feng Yu, and Takaaki Ishigure
Th2A.2 Optical Fiber Communication Conference (OFC) 2017

Low loss/Large tolerance mode converter between SiN waveguide and cleaved single mode fiber

Lianxi Jia, Junfeng Song, Tsung-Yang Liow, Xianshu Luo, Xiaoguang Tu, Qing Fang, Sing-Chee Koh, Mingbin Yu, and Guoqiang Lo
Th1A.5 Optical Fiber Communication Conference (OFC) 2014

Coupling of single mode fibers to planar Si waveguides using vertically tapered mode converters

M. B. Frish, J.A. Fijol, E. E. Fike, S. A. Jacobson, P. B. Keating, W. J. Kessler, J. LeBlanc, C. Bozler, M. Fritze, C. Keast, J. Knecht, R. Williamson, and C. Manolatou
IFB2 Integrated Photonics Research (IPR) 2002

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved