Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group
Conferences > OFC > 2013 > OTu2C > OTu2C.3
  • Optical Fiber Communication Conference/National Fiber Optic Engineers Conference 2013
  • OSA Technical Digest (online) (Optica Publishing Group, 2013),
  • paper OTu2C.3
  • •https://doi.org/10.1364/OFC.2013.OTu2C.3

Cascade of two opposite tapers for butt-coupling between fibers and silicon photonic wires with large misalignment tolerance and low polarization dependency

Kai-Ning Ku and Ming-Chang M. Lee

Not Accessible

Your library or personal account may give you access

Abstract

A new coupler design consisting of a three-dimensional SU-8 taper and a silicon inverted nanotaper is presented. The fiber misalignment tolerance is ±3 μm and the coupler loss is 2.8 dB(TE) and 4.1 dB(TM).

© 2013 Optical Society of America

PDF Article
More Like This
Low-loss and misalignment-tolerant fiber-to-chip edge coupler based on double-tip inverse tapers

Jing Wang, Yi Xuan, Chunghun Lee, Ben Niu, Lei Liu, Gordon Ning Liu, and Minghao Qi
M2I.6 Optical Fiber Communication Conference (OFC) 2016

Low loss/Large tolerance mode converter between SiN waveguide and cleaved single mode fiber

Lianxi Jia, Junfeng Song, Tsung-Yang Liow, Xianshu Luo, Xiaoguang Tu, Qing Fang, Sing-Chee Koh, Mingbin Yu, and Guoqiang Lo
Th1A.5 Optical Fiber Communication Conference (OFC) 2014

Low polarization-dependent-loss silicon photonic trident edge coupler fabricated by 248 nm optical lithography

Xin Tu, Patrick Dumais, Ming Li, Dominic Goodwill, Hongyan Fu, Dongyu Geng, and Eric Bernier
AS4B.3 Asia Communications and Photonics Conference (ACP) 2015

View More...
Select as filters
Select Topics Cancel
Top
       
© Copyright 2024 | Optica Publishing Group. All rights reserved, including rights for text and data mining and training of artificial technologies or similar technologies.
Privacy | Terms of Use