Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group
  • Optical Fiber Communications Conference
  • OSA Trends in Optics and Photonics (Optica Publishing Group, 2002),
  • paper ThGG123

Optical Reference Receiver Calibration for Real Time Oscilloscopes

Not Accessible

Your library or personal account may give you access

Abstract

Industry mask testing standards for SONET, Fiber channel, and others require that the measurement channel consisting of an optical to electrical converter abbreviated O/E, and preamplifier, and digitizer exhibit a nominal 4th order Bessel Thompson response.1,2 If the magnitude response falls within the standard limits then the measurement channel is referred to as an optical reference receiver. This results in uniform measurements across various test instrumentation setups.

© 2002 Optical Society of America

PDF Article
More Like This
Real Time Picosecond Optical Oscilloscope

J. A. Valdmanis
MA6 International Conference on Ultrafast Phenomena (UP) 1986

In-Line Reference Cell for Real-Time Calibration of Laser Absorption Spectrometers

Clinton J. Smith, Amir Khan, Mark A. Zondlo, and Gerard Wysocki
CW3B.1 CLEO: Science and Innovations (CLEO:S&I) 2012

Real-time ground level atmospheric nitric oxide measured by calibrated TDLAS system

Adam Mock, Chad Roller, Jim Jeffers, Khosrow Namjou, Patrick J. McCann, and Joe Grego
SaC4 Laser Applications to Chemical and Environmental Analysis (LACSEA) 2002

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved