Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

Optical link for cellular-telephone microcells

Not Accessible

Your library or personal account may give you access

Abstract

Cellular-telephone systems are expanding into the newly available frequency range of 1.8–2.2 GHz (existing U.S. systems operate in the 900-MHz band) and also are going to a microcell architecture to accommodate the increasing number of users. Fiber-optic links will be used to connect the microcells to the base station if cost and performance problems can be solved. The rf signals will be in an FM or digital (for the CDMA standard) format, but the optical links will use analog intensity modulation to keep the microcell equipment as simple as possible. Because of signal fading, interference signals, and the large number of rf channels, the performance requirement for these links is high (e.g., 67- to 82-dB intermodulation-free dynamic range with 1.25-MHz noise bandwidth for a CDMA system).1 Conventional direct or externally modulated analog links can barely reach the bottom end of this performance range at 2 GHz.

© 1995 Optical Society of America

PDF Article
More Like This
Dynamic-range requirements for analog fiber-optic links in fiber-fed wireless microcells

David M. Cutrer, John B. Georges, Tuan H. Le, and Kam Y. Lau
ThF1 Optical Fiber Communication Conference (OFC) 1995

Wide-dynamic-range technologies for a fiber-optic microcell radio system

Ryutaro Ohmoto, Hiroyuki Ohtsuka, and Kojiro Araki
ThF3 Optical Fiber Communication Conference (OFC) 1995

First single-mode optical-fiber cable link in live telephone service in U.S.A

Mark Farrant, Gary Ashe, Russell Dewitt, Jack Brouhard, Norman Meres, Richard Labarbera, Steve Woodard, Gary Brewster, and William Shinnick
MD4 Optical Fiber Communication Conference (OFC) 1984

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved