Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

Parameter extraction from subthreshold spectra in cleaved gain- and index-coupled DFB LDs

Not Accessible

Your library or personal account may give you access

Abstract

Determination of device parameters in fabricated distributed-feedback (DFB) laser diodes (LDs) is very important for further optimization of the laser design and even the system design. In particular, the coupling coefficient is one of the most influential parameters, and hence it should be measured precisely. However, to date, the determination of the coupling coefficient in DFB lasers has been possible only for indexcoupled devices with antireflection-coated facets and has not been very accurate.1 Moreover, in such measurements no other parameters, such as gain and effective group index, could be derived.

© 1995 Optical Society of America

PDF Article
More Like This
First observation of changing coupling coefficients in a gain-coupled DFB laser with absorptive grating by automatic parameter extraction from subthreshold spectra

Toru Nakura, Kenji Sato, Masaki Funabashi, Geert Morthier, Rod Baets, Yoshiaki Nakano, and Kunio Tada
CThM1 Conference on Lasers and Electro-Optics (CLEO:S&I) 1997

Gain-coupled DFB LDs with high dynamic single-mode yield at 2.5-Gbit/s modulation

K. Shibata, E. Ishimura, T. Aoyagi, A. Takemoto, T. Takiguchi, G. Sakaino, Y. Hisa, T. Nishimura, and M. Aiga
FC5 Optical Fiber Communication Conference (OFC) 1995

Carrier dynamics of gain-coupled and index-coupled InGaAs/lnGaAIAs quantum well distributed feedback lasers

J. Kovač, C. Kaden, V. Hofsäß, H. Schmidt, H. P. Gauggel, J. Kuhn, H. Schweizer, A. Hase, H. Künzel, and H. Hillmer
UTUA5 Ultrafast Electronics and Optoelectronics (UEO) 1995

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All rights reserved, including rights for text and data mining and training of artificial technologies or similar technologies.